APC200 Throttle ValveController
APC200 Pressure & Flow Controller is a Digital PID Pressure Controller for throttle
Valve, It can supply +/- 15VDC to power and provide a readout for an attached
Capacitance Manometer & four mass flow controllers.
Features & Benefit
■ Maximum 4 channel MFC control out(2,4 channel available)
■ RS-232C PC Interface , TTL flow On/Off Command available
Product
Dimensions
Specifications
Valves Operated | ATV1000 Exhaust Throttle Valves, MKS Type 653 and Others |
Pressure Input Signal | Standard : 0-10 VDC |
| Input Power Required | 90-132 or 180-264 VAC, 50/60 Hz |
Set Point Programmable External Analog | 5 total, programmable in any combin for pressure or position (adjustable from the front panel or RS232/RS485 selectable from the front panel, TTL, or RS232/RS485) 0-10 VDC |
Controller Repeatability | ±0.1% of F.S |
Ambient Operating Temperature | 150C - 450C |
Output Power | ±15 VDC ±5% @ 1.5 Amp |
Analog Output Signal | 0-10 VDC for 0-100% valve position and 0-10 VDC for 1-100%, F.S pressure |
Size | 1/2-rack packing : 88mm H x 241mm W x 225 D |
Display | 240x(RGB)
X 320 pixels Transmissive LCD (pressure, position and external set-point readout) |
Display Units Soft Start | Torr, mTorr, mbar, Pascal, cmH20, inH20, mbar, kpa Standard |
PID Control | Standard |
Remote Zero | Standard |
Interface | Front panel, Analog, TTL and RS232 , RS485 |
Relay Output | 2, process limits : 24 Volts AC/DC 0.5Amp resistive |
Remote Control Override (Open, Close, Hold) | Standard |
Position Control Capability | Standard |
Battery Backup | N/A
|
